Mon-Fri 9:00-18:00 CET+39 095 7211344info@vitasanlabs.com

Ready-to-use media

Malt Extract Agar with Chloramphenicol

Medium for detection, isolation and enumeration of fungi, particularly yeast and moulds, also from air and water samples.

Cat. No.
LC-4674
Format
10 x 200 mL flasks
Storage
8 to 25 °C
Minimum guaranteed shelf life
6 months
Minimum order
10 packs

Malt Extract Agar promotes the growth of almost all fungi because of its balanced composition, and its ability to inhibit bacteria due to its low pH and the presence of chloramphenicol.

Request a quote

Cat. No.FormatPrice
LC-467410 x 200 mL flasks

We reply within 24 hours with a quote and availability.

Key features

Applications

Selective enumeration and selective isolation of yeasts and molds.

Industry

Water.

Presentation

10 prepared bottles, 250 mL, with 200 ± 5 mL.

Packaging

1 box with 10 bottles 250 mL. Non-injectable cap.

Description and technique

Technique

Melt the medium contained in the bottles in a water bath (100 °C), avoiding overheating, before pouring into Petri dishes when cooled to room temperature.

Once solidified on a flat surface, spread the plates by streaking methodology or by spiral method.

Collect, dilute and prepare samples and volumes as required according to specifications, directives, official standard regulations and/or expected results.

Spread the plates by streaking methodology or by spiral method. Incubate the plates right side up aerobically at 25-30 °C for 48 h up to 5 days.

(Incubation times longer than those mentioned above or different incubation temperatures may be required depending on the sample, on the specifications.)

After incubation, enumerate all the colonies that have appeared on the surface of the agar.

Each laboratory must evaluate the results according to their specifications.

Calculate total microbial count per mL of sample by multiplying the average number of colonies per plate by the inverse dilution factor if a diluted sample was streaked. Report results as colony forming units (CFU) per mL or g along with incubation time and temperature.

Presentation

Presentation10 prepared bottles, 250 mL
Filling200 ± 5 mL
Packaging1 box with 10 bottles 250 mL. Non-injectable cap.

Composition

Ingredientg/L
Malt extract30.00
Soy peptone3.00
Chloramphenicol0.10
Agar15.00

Quality control

Physical/chemical control

ColorYellowish-brown
pH5.5 ± 0.2 at 25 °C

Microbiological control

Inoculate: practical range 100 ± 20 CFU; min. 50 CFU (productivity) / 10⁴-10⁶ (selectivity).

Aerobiosis. Incubation at 25-30 °C, reading at 48-72 hours to 5 days.

MicroorganismGrowth
Aspergillus brasiliensisATCC 16404, WDCM 00053Good (≥ 70%)
Candida albicansATCC 10231, WDCM 00054Good (≥ 70%)
S. cerevisiaeATCC 9763, WDCM 00058Good (≥ 70%)
Staphylococcus aureusATCC 6538, WDCM 00032Inhibited
Escherichia coliATCC 8739, WDCM 00012Inhibited

Sterility control

Incubation 48 hours at 30-35 °C and 48 hours at 20-25 °C: NO GROWTH.

Check at 7 days after incubation in same conditions.

Bibliography

  • ATLAS, R.M., L.C. PARKS (1993) Handbook of Microbiological Media. CRC Press, Inc. London.
  • BALLOWS, HAUSLER, HERMAN, ISENBERG & SHADOMY (eds.) (1991) Manual of Clinical Microbiology. ASM. Washington.
  • DOWNES, F.P. & K. ITO (2001) Compendium of Methods for the Microbiological Examination of Foods. 4th ed. APHA. Washington.
  • FDA (Food and Drug Administration) (1978) Bacteriological Analytical Manual A.O.A.C. Washington.
  • ISO 11133:2014/Amd 1:2018. Microbiology of food, animal feed and water. Preparation, production, storage and performance testing of culture media.
  • ISO 16212 Standard (2017) Cosmetics - Microbiology - Enumeration of yeast and mould.
  • ISO 16000-17:2008 Indoor Air - Detection and enumeration of moulds - Culture Based method.
  • RAPP, M. (1974) Indikator-Zusätze zur Keimdifferenzierung auf würze und Malzextrakt Agar. Milchwiss. 29:341-34.
  • REIS, J. (1972) Ein selektives kulturmedium für der Nachweiss von Aspergillus flavus. Zbl. Bokt. Hyg. I. Abt. Orig. 220:564-566.

What you receive

The product

Shipped under controlled temperature when the product requires it.

Lot certificate

Every lot comes with its certificate.

Tracked shipment

Follow your shipment live, from our warehouse to your lab.

Other products in the same category

All products in the category

Frequently asked questions

Can I ask for formats other than those listed?

Yes: custom formats and OEM packs are available on request. Tell us the quantities you need.

How do I see the prices?

Prices are shown after you sign in to the customer area, with your account discount already applied.

How long does delivery take?

We give you the availability with the quote, within 24 hours of your request.